How much weight can a loft take?
Ceiling joists hold up a ceiling, not a floor. In most houses they were sized for the ceiling's weight, light storage and someone walking about up there now and then. A floor downstairs is designed for several times as much.
The government's Planning Portal says as much: most loft joists weren't designed to carry much weight, and boarding for storage may need building regulations approval. See the building regulations guide.
That doesn't mean don't store things. It means store light things, spread them out, and keep the heavy ones downstairs.
The rough numbers
These are design figures for working out joist sizes, not a limit to load up to. There's a safety margin built in, and your loft may be stronger or weaker than the usual. Treat them as a sense of scale.
- A typical loft is designed for about 25 kg per square metre of stored things, spread evenly, plus a person walking on it.
- A floor in the rooms below is designed for about 150 kg per square metre, six times as much.
- The boards themselves weigh about 12 kg per square metre (18 mm chipboard loft boards, the usual kind).
So the boards use some of the allowance before anything goes on them.
A worked example: what a corner of boxes weighs
Say you board a small area around the hatch and stack two large plastic storage boxes on each square metre.
| What's on one square metre | About |
|---|---|
| Two boxes of Christmas decorations | 10 kg |
| Two boxes of clothes and bedding | 16 kg |
| Two boxes of paperwork | 40 kg |
| Two boxes of books | 50 kg |
Decorations, bedding and empty suitcases are what lofts are for. Two boxes of books on every square metre is twice the design figure, before anyone stands there. That's the stuff to keep downstairs.
These weights are examples, not measurements of your boxes. A full box of books is heavier than most people expect. If you can't lift it comfortably to head height on a ladder, it's probably too heavy for the loft anyway.
How to store more, safely
- Keep the heavier boxes over a wall below, where the joists are supported, not in the middle of a span. Keep the low edges at the eaves clear, though: that's where the loft's air comes in.
- Spread things out rather than stacking high in one spot.
- Use plastic boxes with lids, which are lighter than wooden chests and keep dust and damp out. See loft storage: what's worth doing.
- Don't fix shelving to the roof timbers without asking someone who knows. Trusses, the W-shaped timbers in most homes built since the 1960s, are designed as a whole, and no part of one should be cut, drilled or loaded on its own.
Signs you've asked too much
Cracks appearing in the ceiling below, a ceiling that looks like it's sagging, or boards that bounce when you step on them. If you see any of these, take the heaviest things out and ask a builder or structural engineer to look.
What your installer checks
You're never asked to judge the joists yourself. When you order, your photo from the hatch and your close-up of the insulation and a joist show the installer the size and spacing. They check the joists can take boarding, and what you've said you'll store, before they confirm the job.