Loft boarding: DIY or a firm? An honest comparison

Some people should do this themselves. If you're handy, you're boarding a small area, and your insulation is below the tops of the joists, it's a weekend job with a drill. We'd rather tell you that than pretend otherwise.

For everything else, here's what's involved, job by job.

Job by job

The jobDIY?WhyFitted here
Boards on the joists, small area, with a ladderA fair DIY jobBoards go straight on, screwed down. The hard part is working on your knees, on the joists, with a torch£690
Raising the boards over deep insulation, small areaHarderEvery board sits on supports that have to be level and fixed to the joists, with a gap for air+£200
About half the loft, with a ladderA long jobDozens of boards up a stepladder through the hatch, then a day or more on your knees£1,145
A loft ladder, aluminiumPossible, with two peopleA heavy box at head height, fixed to the hatch frame, cut to your ceiling height£295
A bigger hatchBest left to a firmOften means cutting a ceiling joist and supporting the ends. Cut a truss and you weaken the roof+£250

Indicative prices, including VAT; "+" means added to the boarding price. Get an indicative price now; a local trade confirms it.

Where DIY goes wrong

The usual five, and how to avoid each:

  1. A foot through the ceiling. Between the joists there's only plasterboard. Kneel on a board laid across two joists, never on the insulation.
  2. Squashed insulation. Boards laid on insulation that's deeper than the joists squash it and stop it working. See can you board over loft insulation?
  3. A screw through a cable or pipe. Cables run across the joists, and some run along them. Lift them clear before each board goes down, and know where they are before each screw goes in.
  4. Boards over the spotlights. Spotlights set into the ceiling below get hot. Leave space around them.
  5. Blocked eaves. Boards and boxes pushed into the low edges of the loft block the air coming in, and that's how condensation starts. See condensation after boarding.

If you choose a firm

You'll want to compare like with like. Firms package the job differently, with or without VAT, raised or not, with or without a light. Questions to ask a loft firm puts two quotes side by side.

Or tell us about your loft. You'll see everything itemised, with an indicative price, and one local firm gets your job, checked before it does. No sales visit, and nothing to pay to order.

Questions

Is DIY loft boarding cheaper?

The materials cost less than a fitted job, yes. What you're paying a firm for is the time, the tools, getting the boards up through the hatch, and knowing the insulation, cables and ventilation are dealt with properly.

Can I fit a loft ladder myself?

Many people do. It's a two-person job with a heavy box at head height, and the ladder has to be cut to your ceiling height. Get the length wrong and it won't sit safely.

What boards should I use?

Loft boards are tongue-and-groove chipboard panels, usually 18 mm thick and narrow enough to go through a hatch. Screw them down rather than nailing, because hammering on ceiling joists can crack the ceiling below.

Should I lay boards straight onto the insulation?

No. If the insulation is deeper than the joists, boards on top squash it and it keeps less heat in. Raise them above it on loft legs or battens, with a gap for air.

Coming soon

Ordering loft boarding and ladders online opens soon. It'll be a few questions, with help at each one, and photos from your phone.

Coming soon