Is your loft hatch big enough? Sizes, and what a bigger one costs

Most loft ladders need a hatch at least 55 cm across on both sides. For boxes, it needs to be bigger than the biggest thing you'll put up there, at an angle. Many older homes have hatches smaller than both.

Measure the hole, not the door

Drawing of a loft hatch seen from below, the opening to measure

What size do you need?

A loft ladder coming down through a hatch at least 55 cm across, into a landing up to about 2.9 m high 55 cm or more up to~2.9 m 1Hatch door 2
FIG. 1 · Will a ladder fit? Measure the hatch across (most ladders need 55 cm or more) and the floor to the ceiling under it (standard ladders suit up to about 2.9 m).
  • For a loft ladder: 55 cm or more on both sides suits most sliding and folding ladders. The ladder's box sits on the hatch door, so the opening has to take the ladder folded.
  • For your boxes: measure your largest suitcase or storage box. It goes up at an angle, so it can be a little bigger than the hatch one way, but not both.
  • For you: you'll climb through it with things in your hands. A hatch you have to twist through is one you won't use.

If yours is too small

You have three options:

  1. A concertina ladder. It folds into a small stack, so it suits hatches under 55 cm and tight spaces above. It doesn't help your boxes fit.
  2. Make the hatch bigger. The opening is cut wider or longer and a new frame fitted. If that means cutting a ceiling joist, its cut ends are supported on new timbers either side, called trimming. It's routine for a loft firm.
  3. A new hatch somewhere better. Sometimes the hatch is in the wrong place: over the stairs, in a small bedroom or with no room below for a ladder. A new one can be cut where it suits you, and the old one closed up.

A hatch above the stairs needs a visit, so a ladder can be planned to land safely.

If the joists are part of roof trusses, the W-shaped timbers in most homes built since the 1960s, they mustn't be cut without the truss designer's or an engineer's say-so. Your installer checks this from your photos. See building regulations for loft boarding.

Firms that publish a price for a plastic drop-down hatch on its own charge £130 to £178. Making the opening bigger or cutting a new one is more work, and that's the price below.

What it costs

Job, supplied and fittedTypical published pricePrice here
A new or bigger hatchadds £220 to £375adds £250
Loft ladder, aluminium£210 to £375most often £220 to £299£295

Prices here include VAT. Prices are indicative until a local trade confirms them.

What changes the price

Bigger, or new

Making a small hatch bigger and cutting a new one where it suits you better cost about the same. If there's no way into the loft at all yet, an installer visits first to see the joists and plan the work, for free.

The ceiling

Most ceilings are plasterboard. Older homes may have lath and plaster, which takes more care to cut, and some firms charge a little more for it.

The joists

A wider opening can mean working around a joist. Your installer checks from your photos what's needed to cut or enlarge the hatch safely.

The kind of hatch

A simple plastic drop-down hatch is the usual choice with an aluminium ladder. Wooden ladders usually come with their own insulated hatch.

Where it is

A hatch on the landing or in a bedroom can be priced from photos. One above the stairs needs a visit, so a ladder can be planned to land safely.

Making good

Filling and painting around a new or bigger hatch isn't included, so plan to decorate afterwards.

A worked example: a small hatch and a ladder

A hatch on the landing that's 50 cm on its short side, too small for most ladders. It's made bigger, and an aluminium ladder is fitted.

A bigger hatch£250
Loft ladder, aluminium£295
Your price£545

Questions

Do I need a new hatch to fit a loft ladder?

Not if your hatch is 55 cm or more on both sides. Most ladders fit that. If it's smaller, either make it bigger or ask about a concertina ladder, which folds small.

Does a bigger hatch need building regulations approval?

It can. If no joist is cut, it's unlikely. Cutting a joist is a change to the structure, and your council's building control team may want to know, so ask them or your installer before the work. Cutting a roof truss needs the truss designer's or an engineer's advice first.

What about a plastic hatch on its own?

Some firms publish a price for fitting a plastic drop-down hatch on its own. The hatch price here is for making an opening bigger or cutting a new one.

Coming soon

Ordering loft boarding and ladders online opens soon. It'll be a few questions, with help at each one, and photos from your phone.

Coming soon